Arizona AG Management · Facility 2911

Mesh backbone:Red troncal: 122 units are online and communicating, so the gateways can push WP5 to them at the scheduled update. Each gateway updates to WP5 and pushes it to every device online at that moment; devices that are offline simply stay on WP4 (unchanged — not harmed). This is a multi-gateway facility with 4 gateways on record: H2100005496 and H2100005499 (the two on the WP4 Gateways sheet) are both online and carrying the mesh today — both must be scheduled together so the whole fleet moves to WP5 in one window. The two legacy units H2100002429 (silent since 2025-01-02) and H2100002430 (silent since 2025-03-03) appear decommissioned/replaced — confirm in the AROYA app before the push. The push is run remotely by AROYA; a site visit is the exception, not the default.

Your fleet lists 36 radios as “repeaters”; the serial prefix splits them into 12 range-extender/IO radios and 24 climate stations (H111…) — a repeater-class radio with an Atmos-14 attached. Across the 123 substrate nodes, 88 have a reporting attached sensor, 4 are alive but the sensor isn’t reporting (reseat the probe / check the connector), 27 are dark with the node, and 4 have no sensor paired. Beyond TEROS-12s (98), this fleet also carries Atmos-14 climate sensors, SQ-521 PAR sensors, ES-2 EC/temp sensors and 0 already-upgraded TEROS One probes — attached sensors ride on their host radio for the WP5 push.

Cross-referenced against the retired-device register (portal_api · retired=true, pulled 2026-06-10): sensors whose host puck/radio is flagged retired qualify for a free 1:1 TEROS One Single replacement. This facility's retired register is empty (0 retired devices), so there are 0 free entitlements — every TEROS One / Climate One upgrade here is at the trade-in pricing below.Comparado con el registro de dispositivos retirados: los sensores cuyo anfitrión está retirado califican para un reemplazo TEROS One Single gratis 1:1. El registro de esta instalación está vacío (0 retirados), así que hay 0 canjes gratis — todas las mejoras usan el precio de canje de abajo.

The gateway updates to WP5 and pushes it to every device that is online and communicating at the scheduled time (the go/no-go is: online, battery ≥ 30%, signal ≥ 50%). Devices that are offline at that moment simply stay on WP4 — they are not harmed, they just don't get the new firmware. The catch is compatibility, not damage: a WP4 device needs a WP4-matched gateway to keep communicating, so the goal is to have as many devices as possible online at the push. The update is run remotely by AROYA; keeping the fleet online is the site's responsibility.

1. P0Bring as many devices online as possible before the scheduled push. Work the "Offline" and "Likely to miss" lists — replace batteries and shore up signal so each meets online + battery ≥ 30% + signal ≥ 50%. Every device up at push time receives WP5; every device down stays on WP4.
2. P1Shore up the "At risk" list. Marginal battery/signal devices may drop out around the push window — plan battery swaps and repeater coverage now.
3. P2Decide what to retire or trade in instead of recovering. For dead/legacy sensors you won't bring back, mark them for a TEROS One / Climate One upgrade in the planner above rather than spending effort reviving them — and claim the free trade-in above first.
4. P3Confirm the gateways/sinks are online in the AROYA app. The gateways carry the push — this is a multi-gateway facility, so verify BOTH H2100005496 and H2100005499 are online (and confirm the two silent legacy gateways are decommissioned) before the scheduled update.
5. After the push, recover any stragglers. Devices that were offline can still be brought current later by reverting a gateway to WP4, bringing them online, re-running, then returning the gateway to WP5 — there's no time limit. Keep the mixed WP4/WP5 window short, though: mixed firmware on one network long-term can cause connectivity issues.
6. Note: existing WP4 gear keeps working as-is; new AROYA equipment requires WP5, which is the reason to update.

Method & scope. One row per physical device; an attached sensor (TEROS-12, Atmos-14, SQ-521 PAR, ES-2, TEROS One) is folded into the radio it plugs into, and sensor-head serials are masked — locate hardware on the floor by the H-prefix radio serial only. Class by serial prefix (H111 = climate station, H21x = gateway, H31x/H32x/H33x/H34x = node). Readiness reflects the WP5 go/no-go — a device receives WP5 only if it's online with battery ≥ 30% and signal ≥ 50% at the scheduled push; otherwise it stays on WP4 (unharmed) and can be recovered later via a WP4 gateway revert. Telemetry: AROYA public API, continuous 24 h window (2026-06-10 → 2026-06-11). Flags: battery crit<3.0/warn<3.2 V; RSSI crit<-95/warn<-85 dBm; link crit<40/warn<60; travel crit>60/warn>30 s; last-seen >48 h = offline. Priorities: P0 = act before the push, P1 = shore up, P2 = plan/trade-in, P3 = verify only. This is a device-readiness report — cultivation metrics (dryback in absolute pp, irrigation P0–P3 day-phases) are covered in the facility's cultivation audits, not here.